INFRARED UTV BELT TEMP SENSOR FOR LOWRANCE GPS BY RUGGED ROUTES
INFRARED UTV BELT TEMP SENSOR FOR LOWRANCE GPS BY RUGGED ROUTES
This infrared UTV belt temp sensor is an easy install accessory for Lowrance HDS and Elite Ti GPS Units. It simply connects to the N2K network just like a Point-1 Baja Antenna, and displays your CVT Belt Temp right on the Lowrance GPS screen. Keep an eye on your belt temp in order to adjust your driving style or as an aid in clutch tuning for prolonging the life of your CVT Belt.
Simply drill a 3/8″ – 1/2″ hole in the plastic belt cover above the center of your belt, and stick on the sensor with the lens centered over the hole. The sensor contours to the belt cover with a 3/16″ thick waterproof closed cell foam & easily sticks on with a high strength waterproof adhesive by 3M.
Install on a clean plastic surface, and hold down for 30 seconds. Wait 24 hours to fully adhere.
*Compatible with Gen2 or Newer HDS Units, and Elite Ti 7″ Or Larger. Not Compatible with Elite-5 Ti.
*Sensor Only, NMEA 2000 Connectors or extension cables not included.
For NMEA 2000 components, please visit: Lowrance Data Cables & Connectors
For More Info or to Order, Visit:
https://ruggedroutes.com/UTV-belt-temperature-gauge-sensor-lowrance-off-road-gps.html
Rugged Routes
https://ruggedroutes.com
909-547-4651
The post INFRARED UTV BELT TEMP SENSOR FOR LOWRANCE GPS BY RUGGED ROUTES appeared first on Dirt Wheels Magazine.